Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Solved: Serious Problem #2 - Videos do not start everytime
09-02-2013, 11:20 PM
Post: #8
RE: Serious Problem #2 - Videos do not start everytime
Dear Dave,

The C# program below only contains a DSCapture (No Player).
=> To view the image I use the VideoPreview property of the DSCapture. The vertical mirroring problem is also present.
https://dl.dropboxusercontent.com/u/3245...abTest.zip

I created a c# program with only the DSCapture component and 3 buttons included.
There are 3 camera's connected to my computer.
1. Terratec Grabby Framegrabber (Analog camera connected)
2. IDS µEye USB Color camera
3. IDS µEye USB Monochrome camera

The attached program has 3 buttons to select the camera's.
When we toggle between the camera's the image comming from the IDS µEye camera's is mirrored.
To fix the problem we have to switch to another videodevice and select it again.
I never saw the problem with the analog camera.

VideoLab V6.0 is used.
VideoLab V5.2 does NOT contain the problem.
The demo application from IDS is also working well.

I hope this explanation can give more direction into the problem.
Maybe the problem is not located at the player side knowing that I haven't included one into the demo Application above.

Best Regards, Peter

------------------------------------------------

(09-02-2013 10:13 PM)Dave Wrote:  We're aware of this issue, i'll discuss it with Boian some more. I was hoping for this new player (LAVPlayer) to solve this issue but apparently it isn't finished yet.

Regards,
Dave
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Serious Problem #2 - Videos do not start everytime - Peter - 09-02-2013 11:20 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)