View source

<b><span style="color:red">
This is a Beta Read Only version of this page. 
Please review and send recommendations to [mailto:mitov@mitov.com mitov@mitov.com]. 
We will enable the editing as soon as we are happy with the overall Wiki site.
</span></b>

== Description ==
Call this method to save the current state (transformations,
 clipping region, and quality settings) of this TGPGraphics
 object. You can restore the state later by calling the
 TGPGraphics.Restore method.
 
 
 
 <b>Examples:</b>
 
 The following examples show two ways to use the Save method.
 The first example shows how to restore nested saved states,
 and the second example shows how to restore only the first of
 two nested saved states.
 
 <b>Restoring Nested Saved States</b>
 
 The following example sets the world transformation of a
 Graphics object to a rotation and then saves the state of the
 Graphics object. Next, the code calls TranslateTransform, and
 saves the state again. Then the code calls ScaleTransform. At
 that point, the world transformation of the Graphics object
 is a composite transformation: first rotate, then translate,
 then scale. The code uses a red pen to draw an ellipse that
 is transformed by that composite transformation.
 
 
 
 The code passes state2, which was returned by the second call
 to Save, to the Restore method, and draws the ellipse again
 using a green pen. The green ellipse is rotated and
 translated but not scaled. Finally the code passes state1,
 which was returned by the first call to Save, to the Restore
 method, and draws the ellipse again using a blue pen. The
 blue ellipse is rotated but not translated or scaled.

<code>
 var
   AGraphics : IGPGraphics;
   AState1, AState2 : IGPGraphicsState;
 
 begin
   AGraphics := TGPGraphics.Create( ACanvas );
 
</code>
 <code lang="delphi">
   AGraphics.RotateTransform(30.0);
   AState1 = graphics.Save();
   AGraphics.TranslateTransform(100.0, 0.0, MatrixOrderAppend);
   AState2 = graphics.Save();
   AGraphics.ScaleTransform(1.0, 3.0, MatrixOrderAppend);
 
   // Draw an ellipse.
   // Three transformations apply: rotate, then translate, then scale.
   AGraphics.DrawEllipse(TGPPen.Create( aclRed ), 0, 0, 100, 20);
 
   // Restore to AState2 and draw the ellipse again.
   // Two transformations apply: rotate then translate.
   AGraphics.Restore(AState2);
   AGraphics.DrawEllipse(TGPPen.Create( aclGreen ), 0, 0, 100, 20);
 
   // Restore to AState1 and draw the ellipse again.
   // Only the rotation transformation applies.
   AGraphics.Restore(AState1);
   AGraphics.DrawEllipse( TGPPen.Create( aclBlue ), 0, 0, 100, 20);
 end;
</code>
 
 <b>Restoring Only the First of Two Nested Saved States</b>
 
 The following example sets the world transformation of a
 Graphics object to a rotation and then saves the state of the
 Graphics object. Next, the code calls TranslateTransform, and
 saves the state again. Then the code calls ScaleTransform. At
 that point, the world transformation of the Graphics object
 is a composite transformation: first rotate, then translate,
 then scale. The code uses a red pen to draw an ellipse that
 is transformed by that composite transformation.
 
 
 
 The code passes state1, which was returned by the first call
 to Save, to the Restore method, and draws the ellipse again
 using a green pen. The green ellipse is rotated but not
 translated or scaled.
 
 
 
 Next the code attempts to restore the state identified by
 state2. The attempt fails because the call Restore(state1)
 removed the information blocks identified by both state1 and
 state2 from the stack.

<code>
 var
   AGraphics : IGPGraphics;
   AState1, AState2 : IGPGraphicsState;
 
 begin
   AGraphics := TGPGraphics.Create( ACanvas );
 
   AGraphics.RotateTransform(30.0);
   AState1 = graphics.Save();
   AGraphics.TranslateTransform(100.0, 0.0, MatrixOrderAppend);
   AState2 = graphics.Save();
   AGraphics.ScaleTransform(1.0, 3.0, MatrixOrderAppend);
 
</code>
 <code lang="delphi">
   // Draw an ellipse.
   // Three transformations apply: rotate, then translate, then scale.
</code>

<code>
   AGraphics.DrawEllipse(TGPPen.Create( aclRed ), 0, 0, 100, 20 );
 
</code>
 <code lang="delphi">
   // Restore to AState1 and draw the ellipse again.
   // Only the rotation transformation applies.
   AGraphics.Restore(AState1);
</code>

<code>
   AGraphics.DrawEllipse(TGPPen.Create( aclGreen ), 0, 0, 100, 20 );
 
</code>
 <code lang="delphi">
   // The information block identified by AState2 has been lost.
   // The following call to Restore has no effect because
   // Restore(AState1) removed from the stack the
   // information blocks identified by AState1 and AState2.
   AGraphics.Restore(AState2);
 
   // The Graphics object is still in the state identified by state1.
   // The following code draws a blue ellipse on top of the previously
   // drawn green ellipse.
</code>

<code>
   AGraphics.DrawEllipse(TGPPen.Create( aclBlue ), 0, 0, 100, 20 );
</code>
Note
When you call the Save method of a Graphics object, an
information block that holds the state of the Graphics object
is put on a stack. The Save method returns a value that
identifies that information block. When you pass the
identifying value to the Graphics::Restore method, the
information block is removed from the stack and is used to
restore the Graphics object to the state it was in at the
time of the Save call. Note that the identifier returned by a
given call to the Save method can be passed only once to the
Graphics::Restore method.



Calls to the Save method can be nested; that is, you can call
the Save method several times before you call the Restore
method. Each time you call the Save method, an information
block is put on the stack, and you receive an identifier for
the information block. When you pass one of those identifiers
to the Restore method, the Graphics object is returned to the
state it was in at the time of the Save call that returned
that particular identifier. The information block placed on
the stack by that Save call is removed from the stack, and
all information blocks placed on that stack after that Save
call are also removed.



Calls to the BeginContainer method place information blocks
on the same stack as calls to the Save method. Just as a
Graphics::Restore call is paired with a Save call, an
EndContainer call is paired with a BeginContainer call.





Note When you call Restore, all information blocks placed on
the stack (by Save or by BeginContainer) after the
corresponding call to Save are removed from the stack.
Likewise, When you call EndContainer, all information blocks
placed on the stack (by Save or by BeginContainer) after the
corresponding call to BeginContainer are removed from the
stack.