Using TVLAxisCapture

[andre]

Hi all,

I try to use TVLAxisCapture without success.

I ran D:\Embarcadero\RAD Studio\9.0\LabPacks\ThirdParty\Axis\Register.bat
I can view video from an Axis M1011-W camera using FireFox at http://192.168.1.112/axis-cgi/mjpg/video.cgi.


So I put a TVLAxisCapture in a form, with these properties:
URL = http://192.168.1.112/axis-cgi/mjpg/video.cgi
Login = root
Password = XXXXX

Then I connected the output pin to a TVLImageDisplay.

When I run my application, I get these error messages :

EOleException with message 'One on more properties are invalid'

Exception ESLException in the module ....exe at 00410FCB. Can't connect. Make sure Axis medi control from http//www.axis.com is installed. - 0 - 0.

Wath is wrong ? I also tried using URL = http://192.168.1.112/ instead of URL = http://192.168.1.112/axis-cgi/mjpg/video.cgi and got same errors.

Thanks in advance,
André.