Method procedure TLStopWatch.TTLStopWatch.Pump()

Revision as of 20:28, 10 June 2013 (view source) David Alm (Talk | contribs) (Automated Syncronization with Documentation)

Revision as of 00:05, 11 June 2013 (view source) David Alm (Talk | contribs) (Automated Syncronization with Documentation) Newer edit →

---

Revision as of 00:05, 11 June 2013

This is a Beta Read Only version of this page. Please review and send recommendations to mitov@mitov.com. We will enable the editing as soon as we are happy with the overall Wiki site.

Class: TTLStopWatch

Contents 1 Syntax 1.1 Delphi: 1.2 C++ Builder: 1.3 Visual C++ (MFC): 2 Summary 3 Description

Syntax

Delphi:

procedure Pump();

C++ Builder:

void __fastcall Pump();

Visual C++ (MFC):

void Pump();

Summary

Generates a clock event if enabled and ClockSource is csExternal.

Description

Use the Pump procedure to generate a single clock event. In order to use Pump you must set the Mode to tcmExternal. If there is a higher level pump in the chain such as hardware device the Pump procedure will be ignored. The highest level pump in the chain serves as a master pump and obtains full control of the pumping.

Delphi example:

<c>TLStopWatch1.Pump();</c>

C++ Builder example:

<c>TLStopWatch1->Pump();</c>

Visual C++(MFC) example:

<c>TLStopWatch1.Pump();</c>

C# Example:

<c>stopWatch1.Pump();</c>

Visual C++/CLI example:

<c>stopWatch1->Pump();</c>

C# Example:

<c>stopWatch1.Pump();</c>

VB Example:

<c>StopWatch1.Pump</c>