Class SLSubtractComplex.TSLSubtractComplex

Revision as of 02:45, 11 June 2013 (view source) David Alm (Talk | contribs) (Automated Syncronization with Documentation) ← Older edit

Revision as of 23:53, 25 June 2013 (view source) David Alm (Talk | contribs) (Automated Syncronization with Documentation) Newer edit →

---

Revision as of 23:53, 25 June 2013

This is a Beta Read Only version of this page. Please review and send recommendations to mitov@mitov.com. We will enable the editing as soon as we are happy with the overall Wiki site.

Package: SignalLabPkg

Unit: SLSubtractComplex

Inherits: TSLComplexMultiInput

Contents 1 Syntax 1.1 Delphi: 1.2 C++ Builder: 1.3 Visual C++ (MFC): 1.4 C# (.NET): 2 Summary 3 Description 4 Pins 5 From TSLComplexMultiInput 6 Pins 7 From TSLMultiInput 8 Properties 8.1 Published

Syntax

Delphi:

type TSLSubtractComplex = class( TSLComplexMultiInput )

C++ Builder:

class TSLSubtractComplex : public TSLComplexMultiInput

Visual C++ (MFC):

class CTSLSubtractComplex : public CTSLComplexMultiInput

C# (.NET):

public ref class TSLSubtractComplex : Mitov.SignalLab.ComplexMultiInput

Summary

Combines two input complex signals by performing Subtract operation.

Description

Use this component to Subtract one source complex signal from another. Each output sample is the difference between the input samples. If the data rates of the input buffers are different, the rates are synchronized by stretching the low rate buffers to match the highest rate.

Diagram:

Pins

• PositiveInputPin - The positive input pin for the subtraction.
• NegativeInputPin - The negative input pin for the subtraction.

From TSLComplexMultiInput

Pins

• OutputPin

From TSLMultiInput

Properties

Published

• OutputBuffer