Enum IGDIPlus.TGPLineCap

Revision as of 20:45, 30 October 2012 (view source) David Alm (Talk | contribs) (Automated Syncronization with Documentation) ← Older edit

Revision as of 07:06, 1 November 2012 (view source) David Alm (Talk | contribs) (Automated Syncronization with Documentation) Newer edit →

---

Revision as of 07:06, 1 November 2012

This is a Beta Read Only version of this page. Please review and send recommendations to mitov@mitov.com. We will enable the editing as soon as we are happy with the overall Wiki site.

Package: SignalLabBasicPkg

Unit: IGDIPlus

Contents 1 Syntax 1.1 Delphi: 1.2 C++ Builder: 1.3 Visual C++ (MFC): 2 Summary 3 Description 4 Values

Syntax

Delphi:

type TGPLineCap = (LineCapFlat, LineCapSquare, LineCapRound, LineCapTriangle, LineCapNoAnchor, LineCapSquareAnchor, LineCapRoundAnchor, LineCapDiamondAnchor, LineCapArrowAnchor, LineCapCustom, LineCapAnchorMask);

C++ Builder:

enum TGPLineCap {LineCapFlat, LineCapSquare, LineCapRound, LineCapTriangle, LineCapNoAnchor, LineCapSquareAnchor, LineCapRoundAnchor, LineCapDiamondAnchor, LineCapArrowAnchor, LineCapCustom, LineCapAnchorMask};

Visual C++ (MFC):

enum CTGPLineCap {LineCapFlat, LineCapSquare, LineCapRound, LineCapTriangle, LineCapNoAnchor, LineCapSquareAnchor, LineCapRoundAnchor, LineCapDiamondAnchor, LineCapArrowAnchor, LineCapCustom, LineCapAnchorMask};

Summary

Specifies the type of graphic shape to use on the end of a line drawn with a Microsoft Windows GDI+ pen.

Description

This enumeration that specifies the type of graphic shape to use on the end of a line drawn with a Microsoft Windows GDI+ pen. The cap can be a square, circle, triangle, arrowhead, custom, or masked (hidden). End caps can also "anchor" the line by centering the cap at the end of the line.

Values

LineCapFlat	Specifies that the line ends at the last point. The end is squared off.
LineCapSquare	Specifies a square cap. The center of the square is the last point in the line. The height and width of the square are the line width.
LineCapRound	Specifies a circular cap. The center of the circle is the last point in the line. The diameter of the circle is the line width.
LineCapTriangle	Specifies a triangular cap. The base of the triangle is the last point in the line. The base of the triangle is the line width.
LineCapNoAnchor	Specifies that the line ends are not anchored.
LineCapSquareAnchor	Specifies that the line ends are anchored with a square. The center of the square is the last point in the line. The height and width of the square are the line width.
LineCapRoundAnchor	Specifies that the line ends are anchored with a circle. The center of the circle is at the last point in the line. The circle is wider than the line.
LineCapDiamondAnchor	Specifies that the line ends are anchored with a diamond (a square turned at 45 degrees). The center of the diamond is at the last point in the line. The diamond is wider than the line.
LineCapArrowAnchor	Specifies that the line ends are anchored with arrowheads. The arrowhead point is located at the last point in the line. The arrowhead is wider than the line.
LineCapCustom	Specifies that the line ends are made from a CustomLineCap.
LineCapAnchorMask	Specifies line anchor mask to be used for bitwise boolean operations.