Class SLSubtract.TSLSubtract

Revision as of 00:07, 11 June 2013 (view source) David Alm (Talk | contribs) (Automated Syncronization with Documentation) ← Older edit

Revision as of 00:17, 11 June 2013 (view source) David Alm (Talk | contribs) (Automated Syncronization with Documentation) Newer edit →

---

Revision as of 00:17, 11 June 2013

This is a Beta Read Only version of this page. Please review and send recommendations to mitov@mitov.com. We will enable the editing as soon as we are happy with the overall Wiki site.

Package: SignalLabPkg

Unit: SLSubtract

Inherits: TSLRealMultiInput

Contents 1 Syntax 1.1 Delphi: 1.2 C++ Builder: 1.3 Visual C++ (MFC): 1.4 C# (.NET): 2 Summary 3 Description 4 Pins 5 From TSLRealMultiInput 6 Pins 7 From TSLMultiInput 8 Properties 8.1 Published

Syntax

Delphi:

type TSLSubtract = class( TSLRealMultiInput )

C++ Builder:

class TSLSubtract : public TSLRealMultiInput

Visual C++ (MFC):

class CTSLSubtract : public CTSLRealMultiInput

C# (.NET):

public ref class TSLSubtract : Mitov.SignalLab.RealMultiInput

Summary

Combines two input real signals by performing Subtract operation.

Description

Use this component to Subtract one source real signal from another. Each output sample is the difference between the input samples. If the data rates of the input buffers are different, the rates are synchronized by stretching the low rate buffers to match the highest rate.

Diagram:

Pins

• PositiveInputPin - The positive input pin for the subtraction.
• NegativeInputPin - The negative input pin for the subtraction.

From TSLRealMultiInput

Pins

• OutputPin

From TSLMultiInput

Properties

Published

• OutputBuffer